|
 |
Wireless Internet Point Of Presence |
BASE STATIONS |
|
|
|
|
Network Bandwidth Management
 |
The Bandwidth Control Unit (BCU) is a powerful, full-featured IP Bandwidth Manager. It has been optimized for use at WIPOPs (Wireless Internet Point of Presence) and goes between the wireless access points and the Internet Router. The device limits Internet bandwidth to wireless clients in both directions asymmetrically based on an IP or MAC address as well as keeping detailed throughput usage. Any data rate between 8 Kbps and your full available internet bandwidth can be set.
|
Wireless Access Points
 |
 |
The YDI AP-Plus Access Point is a powerful, feature-rich, two channel 802.11b compliant wireless Access Point that operates on the license-free 2.4 GHz band. It comes with the YDI AP+ firmware upgrade installed which provides intra-cell blocking - the isolation of wireless clients preventing them from relaying packets to each other. With outdoor antennas and amplifiers, long-range line-of-site links are possible.
|
 |
The ORiNOCO AP-2000 Access Point is an 802.11b WiFi compliant wireless Access Point with support for two independent PC Cards. For indoor wireless LAN applications, it can easily migrate from 2.4 GHz to 5 GHz OFDM radio technology and simultaneously host both 802.11a and 802.11b radio cards. The new Wireless Distribution System enables the AP-2000 to act as a repeater or bridge, as well as an Access Point. Ideal for large area Wireless LAN deployment and ease of scalability.
|
 |
The YDI AP-Ant is an 802.11b Access Point built into an 18 dBi flat panel antenna, it is ideal for providing maximum coverage over a focused area, like a 802.11b Hotspots, hotels, airports, apartment buildings, etc. It is easy to install and the benefits of a high-gain directional antenna is achieved without the need for fragile RF adapter cables or bulky coax cables. We also have a long range version with a built-in bi-directional amplifier.
|
All-In-One Base Stations
 |
The YDI WIPOP-In-a-Box (WIB) is a complete two, three or four-channel WIPOP system in a heavy-duty outdoor waterproof enclosure. All that is needed is YDI antennas, coax cables, and AC power. The WIPOP-In-a-Box comes equipped with either a YDI AP-Plus Access Point, AP-1000, AP-2000 or AP-2500. You may load an Access Point with YDI-Fi, Base or Remote, or YDI AP+ firmware upgrades as well as add another Access Point to get three or four channels. Each channel can be equipped with an indoor or outdoor amplifier, 2.4 to 5.8 GHz amplifier converter, DC injectors, or lightning protection.
|
 |
The UNIPOP 802.11b Single Channel Radio in a Box is available in two versions, Economy and Amplified. Each is available with an 802.11b Access Point, RG-1000, or Ethernet Converter for bridging. The amplified version can be equipped with an indoor or outdoor amplifier, 2.4 to 5.8 GHz amplifier converter, or a CN3000 Access Point for use in a Hotspot environment.
|
|
|
